Jet Dust Filtration

Our company, Jiangsu Haike Environmental Tech Co., LTD, learned from advanced foreign technology to build this jet dust filtration system. It combines the good points of two older dust collectors: the chamber reverse air type and the pulse jet type. Old products had two big problems. They could not clean dust strongly enough. And dust stuck back to the filter bags easily. Our new jet dust filtration system does not have these problems. We are a high-tech company with many patents. We started in 2014 and have 28 skilled workers. Our factory is 30 acres in size. We focus on making good equipment for our customers.

This jet dust filtration system takes up very little floor space. It runs in a stable way with steady performance. The filter bags last a long time. The dust removal rate is very high. Daily maintenance work is easy to do. Big cement plants use this system for their kiln heads and kiln tails. Steel plants and power plants also use it a lot. If you run a large factory, this is a great choice for dust control. We offer free technical help before you buy. Our engineers will pick the right model for your needs. We also give you the general drawing and layout drawing for free.

Here are the main numbers for different series. The air flow is based on 0.8 to 1.2 m/min filter speed. The bag length is 6 meters.

Note: Full technical data (pressure drop, emission, air leak, air pressure, etc.) is available from our engineer.

A big cement plant in Jiangxi had a problem. Their old dust collector worked poorly, and dust emissions did not meet the rules. We recommended our jet dust filtration system. After installation, the dust emission dropped below 10 mg per cubic meter. The factory area became clean. The customer was very happy with our equipment. Later, they bought another unit for their second production line.

Hot Tags: jet dust filtration, China jet dust filtration manufacturers, suppliers, factory