Slag Drying Equipment
Slag Drying Equipment suppliers

Slag Drying Equipment

Name: China Customized Slag Drying Equipment Manufacturers Suppliers Factory - Wholesale Service - Haike
Brand: Haike
SKU: 300834362

Our slag drying equipment is made specifically for industrial waste slag. This includes blast furnace slag, steel slag, water granulated slag, and fly ash slag. It removes water so the slag can be ground and mixed later. This slag drying equipment is a key machine for slag powder production and dry mortar additive preparation.

Send Inquiry

Product Introduction

Made Specifically for Industrial Slag

Our slag drying equipment is made specifically for industrial waste slag. This includes blast furnace slag, steel slag, water granulated slag, and fly ash slag. It removes water so the slag can be ground and mixed later. This slag drying equipment is a key machine for slag powder production and dry mortar additive preparation. It uses a special drum structure with built-in combined lifting plates. The drying is thorough. It resists high heat and wear. It handles large amounts. Jiangsu Haike Environmental Tech Co., LTD has 28 workers and a 30-acre factory. We are a high-tech company with many patents since 2014.

Energy Saving with Three-Cylinder Design

We strongly recommend the three-cylinder dryer if you have large daily volume. It saves about 30% coal compared to a single-cylinder dryer. It also has higher heat use efficiency. It takes less floor space. Our engineer will help you calculate the payback period. We provide free technical support before you buy. We also guide installation and commissioning.

Technical Data for Slag Drying Equipment

Inlet water content is ≤15%. Outlet water content is ≤1%. Drum speed is 3-7 r/min. Customization is available.

Model	Capacity (t/h)	Main Motor Power (kW)	Inlet Air Temp (°C)
Φ2.5×7m	20	22	350-750
Φ3.0×7m	30	30	350-750
Φ3.2×8m	40	37	350-750
Φ3.6×8m	45	55	350-750
Φ3.8×10m	60	75	350-750

Case from Shandong Slag Powder Plant

A slag powder plant in Shandong received slag with about 15% water. Grinding directly gave poor results. The mill often got blocked. We installed a Φ3.0×7m three-cylinder slag drying equipment for them. After drying, the water content dropped below 1%. The mill output increased by 30%. The customer later bought another unit for their new plant.