Industrial Dryer Machine
Strong Steel Body
An Industrial Dryer Machine has a thick steel drum. This dryer machine works for sand, ore, or slag. The Industrial Dryer Machine turns slowly at 5 RPM. It can run for three days without a stop. Many factories trust this product for heavy jobs. You can put wet material in one end. Dry material comes out the other end.
Hot Air Flow Path
The product uses a big burner. The burner makes hot air at 400°C. A large fan pulls the hot air through the drum. The product has a special flight design. These flights lift the material up. Then the material falls down through the hot air. This gives very even drying. The whole process takes 15 minutes from start to finish.
Technical Data Table
| Parameter | Value |
| Drum Thickness | 16 mm steel |
| Temperature Range | 100-450°C |
| Motor Power | 30-90 kW |
| Output Moisture | <2% |
| Noise Level | 82 dB |
Easy Daily Check
An product has four grease points. You add grease once per week. The machine has a large clean-out door. You can open it to remove stuck material. The product uses standard bearings. Any local shop sells them. This dryer machine also has a chain guard for safety. The guard keeps hands away from moving parts.
Low Fuel Use
Anproductsaves fuel with a smart burner. The burner turns down when the material is dry. This dryer machine also has insulation on the drum. The insulation keeps heat inside. You use 15% less fuel than old models. Theproductpays back its cost in 8 months. If you need a reliable dryer, buy thisproduct. It will serve you for many years.
Hot Tags: industrial dryer machine, China industrial dryer machine manufacturers, suppliers, factory
Previous
High Temperature DryerNext
No InformationYou Might Also Like
Send Inquiry